Video Light Version 2

Introduction As I started creating YouTube Woodworking Videos in my Woodworking shop I realized that my shop lighting while very good for woodworking was NOT good for video work.   I needed lighting that would be horizontal not vertical.  That is in your face instead of overhead.  Details and History I had purchased some umbrella […]

Shop Assembly Table

I have been looking at the area in my shop, I call the finish area.   It has been a collector of junk at times.  Recently I put a small folding table with a 30×60″ piece of plywood on top.   I found this very useful for assembly, gluing and finishing.   So I took […]

2014 – Jointer Shelf

Project For me, the most dangerous tool in my shop is my jointer.   I have an 8″ Grizzly G0593 with spiral head.   I have always been concerned about pushing boards through the jointer with my hands on the board.   I have read of boards that explode and your hand goes into the cutter […]

2014 – Planer Feed Table

Planer Infeed / Outfeed This project started when I was looking at Woodworking posts on Google+.   A woodworker published a video of his solution to his “snipe” problem on his lunch box planer. The solution was to replace the in / out feed tables with a single surface from input to output.  I would […]

2014 – Chisel Chest

The chisel Chest is done. I started the project on 5/25/2014. It was completed 7/22/2014. So About 8 weeks. Probably about 10 sessions in the shop. he chest uses full extension 16″ slides.   There are 6 2 1/2″ drawers and one 5″ drawer.   The carcus construction is all Home Depot SandePly with Pocket […]

2014 – Drill Press Table Top

Drill Press Table I had long contemplated a more functional drill press table.    I have looked many times at the WoodPecker setups.   I had decided to build my own and had some of the Wood Pecker drill press channels.   Wood Pecker does a great job with the eMail marketing.    A few months […]